Oracle SPARC M8 Service Manual page 163

/SYS/CMIOU9/PCIE2
[pci@32d/pci@1]
SUNW,qlc@0/fp/disk
SUNW,qlc@0/fp@0,0
SUNW,qlc@0,1/fp/disk
SUNW,qlc@0,1/fp@0,0/ssd@w20350080e518b846,1f
fibre-channel@0,2
fibre-channel@0,3
fibre-channel@0,4
fibre-channel@0,5
...
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF0
[pci@32d/pci@1/SUNW,qlc@0,2]
Class properties [FIBRECHANNEL]
port-wwn = 10:00:00:14:4f:f8:74:85
node-wwn = 20:00:00:14:4f:f8:74:85
bw-percent = 0
...
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF3
[pci@32d/pci@1/SUNW,qlc@0,5]
Class properties [FIBRECHANNEL]
port-wwn = 10:00:00:14:4f:fb:27:29
node-wwn = 20:00:00:14:4f:fb:27:29
bw-percent = 0
#
6. Assign each virtual function to the same domains on the new card to which they
were assigned on the replaced card.
When all virtual functions have been recreated, assign them to the same domains recorded in
the file saved in "Prepare a PCIe Card For Removal" on page
# ldm add-io /SYS/CMIOU9/PCIE2/IOVFC.PF0.VF0 ldg4
# ldm add-io /SYS/CMIOU9/PCIE2/IOVFC.PF0.VF1 ldg4
# ldm add-io /SYS/CMIOU9/PCIE2/IOVFC.PF0.VF2 ldg4
# ldm add-io /SYS/CMIOU9/PCIE2/IOVFC.PF0.VF3 ldg4
7. Verify that the virtual functions have been added to all I/O domains, for example:
# ldm ls-io /SYS/CMIOU9/PCIE2
NAME
----
/SYS/CMIOU9/PCIE2
/SYS/CMIOU9/PCIE2/IOVFC.PF0
/SYS/CMIOU9/PCIE2/IOVFC.PF1
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF0
/SYS/CMIOU9/PCIE2/IOVFC.PF0.VF1
Restore a PCIe Card Configuration on an I/O Domain
PCIE pci_45 primary
VF pci_45 ldg4
VF pci_45 ldg4
151, for example.
TYPE BUS DOMAIN
---- --- ------
PCIE pci_45 primary
PF pci_45 primary
PF pci_45 primary
VF pci_45 ldg4
VF pci_45 ldg4
Servicing PCIe Cards
OCC
STATUS
------
OCC
163