Before replacing an SP, save the configuration using the Oracle ILOM backup utility. Refer to
the Oracle ILOM documentation for instructions on backing up and restoring the Oracle ILOM
configuration.
If
TPM
is initialized on a SPARC M7-8 or SPARC M7-16 server, use the tpmadm
Note -
failover command to backup TPM data and keys automatically to the Standby SP. You can
use the backed up TPM data and keys on the new SP for a system migration or hardware
replacement. For information about enabling failover when you initialize TPM, see
Systems and Attached Devices in Oracle Solaris
After replacing an SP, the SP firmware, the host firmware, and the configuration will be
restored from the existing Active SP to the new SP.
For information about firmware updates and the associated .pkg files that could be
Note -
needed after replacing this component, go to My Oracle Support
Related Information
"Remove an SP or SPP" on page 132
■
"Install an SP or SPP" on page 136
■
Oracle ILOM documentation (http://www.oracle.com/goto/ilom/docs)
■
SP Firmware and Configuration
11.3.
https://support.oracle.com
Securing
Servicing SPs
119