Advertisement
SPARC T5-4 Server
Getting Started Guide
This guide describes how to install and power on Oracle's SPARC T5-4 server for the first time using the
preinstalled Oracle Solaris OS.
Before performing the procedures in this guide, review the following documents at the Oracle documentation
web site:
http://www.oracle.com/goto/T5-4/docs
SPARC T5-4 Server Product Notes - For any late-breaking issues that impact installation requirements.
■
SPARC T5-4 Server Installation Guide - For more detailed installation information.
■
SPARC T5-4 Server Safety and Compliance Manual - For safety and regulatory compliance information.
■
SPARC T5-4 Server Service Manual - For instructions on how to remove or install the server components.
■
For additional safety information, refer to the the Important Safety Information for Oracle's Sun Hardware Systems,
which is in the shipping kit.
Shipment Inventory
1
Server
2
AC power cords (quantity 2)
3
RJ-45 to DB-25 crossover adapter
4
RJ-45 to DB-9 crossover adapter
5
Printed documents
6
Antistatic wrist strap
7
Ethernet cable (quantity 2)
8
Rackmount kit
9
Cable management assembly
10
Rackmounting template
11
Shipping bracket
1
Advertisement
Table of Contents
Related Manuals for Oracle SPARC T5-4
Summary of Contents for Oracle SPARC T5-4
-
Page 1: Getting Started Guide
SPARC T5-4 Server Getting Started Guide This guide describes how to install and power on Oracle’s SPARC T5-4 server for the first time using the preinstalled Oracle Solaris OS. Before performing the procedures in this guide, review the following documents at the Oracle documentation web site: http://www.oracle.com/goto/T5-4/docs... -
Page 2: Prepare The Server
2. Remove all of the processor modules, the main module, the power supplies, the fans, and the PCIe carriers. For instructions on how to remove these components, refer to the SPARC T5-4 Server Service Manual. 3. Install any PCIe adapters that need to be installed in the PCIe carriers. - Page 3 6. Connect an Ethernet cable between one of the server’s NET ports and the network to which the server will communicate. 7. Connect the power cords to the power supplies and to separate power sources. The server is equipped with two power supplies. Connect them to separate power sources (200 to 240 VAC) to provide power redundancy.
- Page 4 11. When prompted, follow the onscreen instructions and type the configuration information for your system. If you are not sure how to respond, accept the default and make changes later when the Oracle Solaris OS is running. After you confirm the configuration information, the server reboots and displays the Oracle Solaris...
- Page 5 12. Log in to the server. You now can enter Oracle Solaris OS commands at the prompt. For more details, refer to the Oracle Solaris 11 or 10 OS man pages and documentation at: http://www.oracle.com/goto/Solaris11/docs http://www.oracle.com/goto/Solaris10/docs Note – Consider using Oracle VM Server for SPARC. Oracle VM Server for SPARC is a preinstalled system virtualization feature that provides a discrete logical grouping with its own operating system, resources, and identity within a single computer system.
-
Page 6: Related Documentation
Oracle VM for SPARC http://www.oracle.com/goto/VM-SPARC/docs Feedback Provide feedback on this document at: http://www.oracle.com/goto/docfeedback Access to Oracle Support Oracle customers have access to electronic support through My Oracle Support. For information visit http:// or visit www.oracle.com/pls/topic/lookup?ctx=acc&id=info http://www.oracle.com/pls/topic/ if you are hearing impaired.
Need help?
Do you have a question about the SPARC T5-4 and is the answer not in the manual?
Questions and answers