Servicing The Cmiou Chassis; Remove A Cmiou Chassis - Oracle SPARC M8 Service Manual

Servicing the CMIOU Chassis

SPARC M8-8 and SPARC M7-8 servers each have a single CMIOU chassis. For the
location of the chassis, see
Servers)" on page
SPARC M7-16 servers have two CMIOU chassis and a single switch chassis. For the locations
of these chassis, see
The steps involved in replacing either of these chassis are the same.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause server components to fail. Follow antistatic precautions to
prevent electrostatic damage. See
These topics explain how to service the CMIOU chassis.
"Remove a CMIOU Chassis" on page 269
■
"Install a CMIOU Chassis" on page 275
■
Related Information
"Identifying Components" on page 15
■
"Detecting and Managing Faults" on page 35
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
"Understanding Server Configurations and Failover Behavior" on page 79
■

Remove a CMIOU Chassis

This is procedure can be performed only by qualified service personnel. Remove AC power
using the circuit breakers on the appropriate PDU before performing this procedure.
"Server Front Components (SPARC M8-8 and SPARC M7-8
16.
"Server Front Components (SPARC M7-16)" on page
"Prevent ESD Damage" on page
18.
61.
Servicing the CMIOU Chassis 269