Install A Power Supply - Oracle SPARC M8 Service Manual

Install a Power Supply

If you are installing a power supply in a SPARC M8-8 server, ensure that you have
Note -
installed the three shims along the side of the replacement power supply. For more information,
see "Install the Power Supply Shims (SPARC M8)" on page
If you remove this component while the server is powered on, wait 30 seconds before
Caution -
installing the replacement component. Doing so ensures that Oracle ILOM has enough time to
detect the new component, which is required for the software to power it on.
The SPARC M8-8 server includes power supplies that are not compatible with the
Caution -
SPARC M7 servers. Never install a SPARC M8 power supply in a SPARC M7 server, and never
install a SPARC M7 power supply in the SPARC M8-8 server.
Install a Power Supply
172.
Servicing Power Supplies 175