SPARC T5-2 Server Getting Started Guide This guide describes how to install and power on Oracle’s SPARC T5-2 server for the first time using the preinstalled Oracle Solaris OS. Before performing the procedures in this guide, review the following documents at the Oracle documentation web site: http://www.oracle.com/goto/T5-2/docs...
1. Place the server in its intended location. For rackmounting and cable management arm instructions, refer to the SPARC T5-2 Server Installation Guide. 2. Connect a serial cable between the server’s SER MGT port and a terminal device.
Page 3
. . . -> After a brief delay, the Oracle Integrated Lights Out Manager (Oracle ILOM) prompt is displayed. For optimal security, change the root password. For more information about administration tasks such as changing passwords, adding accounts, and setting account privileges, refer to the SPARC T5 Series Servers Administration Guide and the Oracle ILOM documentation at: http://www.oracle.com/goto/ILOM/docs...
Page 4
9. When prompted, follow the onscreen instructions and type the configuration information for your system. If you are not sure how to respond, accept the default and make changes later when the Oracle Solaris OS is running. After you confirm the configuration information, the server reboots and displays the Oracle Solaris login prompt.
Oracle VM for SPARC http://www.oracle.com/goto/VM-SPARC/docs Feedback Provide feedback on this document at: http://www.oracle.com/goto/docfeedback Access to Oracle Support Oracle customers have access to electronic support through My Oracle Support. For information visit http:// or visit www.oracle.com/pls/topic/lookup?ctx=acc&id=info http://www.oracle.com/pls/topic/ if you are hearing impaired.