Locate The Server; Removing Power From The Server - Oracle SPARC T5-8 Service Manual

/System
...

Locate the Server

At the Oracle ILOM prompt, type:
1.
set /SYS/LOCATE value=Fast_Blink
->
Alternatively, you can type:
set /System/locator_indicator on
->
The white Locator LEDs (one on the front panel and one on the rear panel) blink.
2. After locating the server with the blinking Locator LED, turn it off by pressing the
Locator button.
Note -
LOCATE value=off command.

Removing Power From the Server

These topics describe different methods for removing power from the chassis.
"Prepare to Power Off the Server" on page 54
■
Targets:
Open_Problems (0)
CPU_modules
Processors
Memory
Power
Cooling
Storage
Networking
PCI_Devices
Firmware
Log
Propertiies:
health = OK
health_details = -
open_problems_count = 0
type = Rack Mount
model = SPARC T5-8
qpart_id = Q9527
part_number = 12345678+11+1
serial_number = xxxxxxxxxx
Alternatively, you can turn off the Locator LED by running the Oracle ILOM set /SYS/
Locate the Server
Preparing for Service 53