Oracle SPARC M8 Service Manual page 218

Remove a Front Indicator Panel
Caution -
discharge. This discharge can cause server components to fail. When you unpack the
replacement part, open the package on a grounded antistatic mat. Always use an antistatic wrist
strap for hardware replacements.
Determine if a front indicator panel requires service.
1.
See "Identify Faulted Components" on page
2. Take the necessary ESD precautions.
See "Prevent ESD Damage" on page
3. Shut down the server and switch off the appropriate PDU circuit breakers.
See "Removing Power From the Server or Domain" on page
Locate the indicator panel at the front of the server.
4.
See "CMIOU Chassis Front Components" on page 20
(SPARC M7-16)" on page
218 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
This procedure requires that you handle components that are sensitive to electrostatic
23.
36.
61.
69.
or "Switch Chassis Front Components