Sp General Status Leds - Oracle SPARC M8 Service Manual

SP General Status LEDs

SP General Status LEDs
No. LED
1 Ready to Remove (blue)
2 Service Required LED
(amber)
3 OK LED (green)
120 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
Icon Description
Indicates that an component can be removed during a hot-service
operation.
Indicates that service is required for the SP or the battery contained in
the component.
The fmadm faulty command provides details about any faults that
cause this indicator to light.
Under some fault conditions, individual component fault LEDs are
illuminated in addition to the Service Required LED.
Indicates these conditions:
■ Off – System is not running in its normal state. System power
might be off.
■ Steady on – System is powered on and is running in its normal
operating state. No service actions are required.
■ Slow blink – A normal but transitory activity is taking place. Slow
blinking might indicate that system diagnostics are running or that
the system is booting.