Servicing Sp Internal Interconnect Assemblies - Oracle SPARC M8 Service Manual

Servicing SP Internal Interconnect Assemblies

There is one SP internal interconnect assembly in each CMIOU chassis. These assemblies
connect the CMIOUs to the SPs.
There is one SP internal interconnect assembly in the switch chassis. This assembly connects
switch units to the SPs.
For the location of the SP internal interconnect assemblies, see
Front Components" on page 20
M7-16)" on page 23.
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail. Follow antistatic precautions to
prevent electrostatic damage. See
These topics explain how to service SP internal interconnect assemblies.
Step Description
1. Understand SP internal interconnect naming.
2. Replace an SP internal interconnect assembly.
Related Information
"Identifying Components" on page 15
■
"Detecting and Managing Faults" on page 35
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
and "Switch Chassis Front Components (SPARC
"Prevent ESD Damage" on page
Links
"CMIOU Chassis Rear Components" on page 21
"Switch Chassis Rear Components (SPARC
M7-16)" on page 25
"Remove an SP Internal Interconnect
Assembly" on page 286
"Install an SP Internal Interconnect
Assembly" on page 290
Servicing SP Internal Interconnect Assemblies
"CMIOU Chassis
61.
285