Servicing Eusb Disks; Remove An Eusb Disk - Oracle SPARC M8 Service Manual

Servicing eUSB Disks

A single eUSB disk is installed in each CMIOU in the server. For the location of the eUSB
disks inside a CMIOU, see
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail. Follow antistatic precautions to
prevent electrostatic damage. See
These topics explain how to service the eUSB disks in the CMIOUs.
Step Description
1. Remove the CMIOU so that you can replace an eUSB
disk.
2. Replace an eUSB disk.
3. Install the CMIOU after you have replaced the eUSB
disk.
Related Information
"Identifying Components" on page 15
■
"Detecting and Managing Faults" on page 35
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
"Understanding Server Configurations and Failover Behavior" on page 79
■

Remove an eUSB Disk

This procedure can be performed only by qualified service personnel after removing the
CMIOU that contains it.
"DIMM and eUSB Locations in a CMIOU" on page
"Prevent ESD Damage" on page 61.
Links
"Servicing CMIOUs" on page 83
"Remove an eUSB Disk" on page 203
"Install an eUSB Disk" on page 205
"Install a CMIOU" on page 102
Servicing eUSB Disks
27.
203