Locate the Server
At the Oracle ILOM prompt type:
■
-> show /System
/System
Targets:
. . .
In the output look for a line under Properties that identifies the product serial number. For
example:
serial_number = BKL1026F8F
Related Information
"Front Panel Components (Service)" on page 13
■
Locate the Server
You can use the Locate indicators to identify one particular server from many other servers.
1.
At the Oracle ILOM prompt, type,
-> set /System locator_indicator=on
The white System Locate indicators (one on the front panel and one on the rear panel) blink.
2.
After locating the server with the blinking System Locate indicator, turn it off by
pressing the Locate button with a stylus.
Alternatively, you can type an Oracle ILOM command to turn off the System Locate indicator.
-> set /System locator_indicator=off
Related Information
"Front Panel Components (Service)" on page 13
■
50
SPARC T8-2 Server Service Manual • June 2019
Need help?
Do you have a question about the SPARC T8-2 and is the answer not in the manual?