Prepare A Switch Unit For Removal - Oracle SPARC M8 Service Manual

No. LED
4 ECB fault (amber)
Related Information
"Checking for Faults" on page 35
■
"Interpreting LEDs" on page 44
■

Prepare a Switch Unit for Removal

Replace a switch unit when the replacement switch unit is available.
Complete the following steps before you remove a switch unit.
The switch unit replacement kit includes plastic covers to protect switch unit connectors.
Note -
Return these covers to Oracle.
Determine which switch unit requires service.
1.
See "Identify Faulted Components" on page 36
2. If you are replacing a switch unit, unpack the new switch unit on a grounded
antistatic mat.
See "Prevent ESD Damage" on page
3. Verify that the switch unit has been removed from service.
-> show /System/Other_Removable_Devices/Scalability_Switch_Boards
/Scalability_Switch_Board_x health
Properties:
health = Offline
Determine your next step.
If health returns a value of Service Required, go to
■
If health returns a value of Offline, go to
■
Only if required, stop the server.
4.
Icon Description
Indicates that a PDECB requires service.
61.
Prepare a Switch Unit for Removal
and "Switch Unit LEDs" on page
Step 4.
Step 5.
Servicing Switch Units
190.
191