Oracle SPARC Enterprise M3000 Getting Started Manual

Oracle SPARC Enterprise M3000 Getting Started Manual

Server
Hide thumbs Also See for SPARC Enterprise M3000:

Advertisement

SPARC Enterprise M3000 Server

Getting Started Guide

This guide describes the minimum steps you must perform to power on and boot your server for the first time.
Before installing the SPARC Enterprise M3000 server, check for late-breaking information about patches and
known issues. Information found in the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes
supersedes the information in this document.
Detailed installation information can be found in the SPARC Enterprise M3000 Server Installation Guide, which is
available at the documentation web site:
http://www.oracle.com/technetwork/documentation/sparc-mseries-servers-252709.html

Safety and Compliance Information

Before performing an installation, refer to the following documents for safety information regarding the SPARC
Enterprise M3000 Server:
Important Legal and Safety Information – Printed document included in the ship kit.
SPARC Enterprise M3000 Server Safety and Compliance Manual – Available online at the documentation web
site.
Prepare the Site for Installation
1. Verify power, air conditioning, and floor area requirements.
See the SPARC Enterprise M3000 Server Site Planning Guide.
2. Check the delivered items against the "LIST OF ATTACHMENT" that came with the server.
Register the System
1. Locate the serial number for your system or the customer information sheet that came with the system.
2. Go to the following web site to register your system:
http://www.sun.com/service/warranty/index.xml#reg
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPARC Enterprise M3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Oracle SPARC Enterprise M3000

  • Page 1: Getting Started Guide

    Information found in the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes supersedes the information in this document. Detailed installation information can be found in the SPARC Enterprise M3000 Server Installation Guide, which is available at the documentation web site: http://www.oracle.com/technetwork/documentation/sparc-mseries-servers-252709.html...
  • Page 2: Install Optional Components

    Before installing the server into the rack, you must first install any optional components that you ordered with the server, such as DIMMs, PCIe cards, and so on. Refer to the SPARC Enterprise M3000 Server Service Manual for the instructions on installing optional components.
  • Page 3: Initialize The Xscf

    3. Use the RS232C cable (serial cable, RJ-45 to DB-9) supplied with the server in the Accessory Kit, and connect the administration console to the serial port (see , #3) on the rear panel of the server. FIGURE 1 You can use any of the following devices with a DB-9 serial port as the administration console: ASCII terminal, workstation, terminal server (or a patch panel connected to a terminal server), or personal computer.
  • Page 4: Power On The Server

    (all power cords must be disconnected and then reconnected). Wait at least 30 seconds before reconnecting the power cords to the server. For details on the setting procedure, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide. 7. Log in to the XSCF Shell with the user account and password that were set in Step ▼...
  • Page 5: Boot The Oracle Solaris Operating System

    For details on how to add optional devices, such as additional memory or an additional PCIe card, see the SPARC Enterprise M3000 Server Service Manual. To add an additional storage device or other peripheral device, see the manual supplied with the device.
  • Page 6: Sparc Enterprise M3000 Server Related Documentation

    Copyright © 2008, 2011, Oracle and/or its affiliates. All rights reserved. FUJITSU LIMITED provided technical input and review on portions of this material. Copyright © 2008, 2011, Oracle et/ou ses affiliés. Tous droits réservés. Entrée et revue tecnical fournies par FUJITSU LIMITED sur des parties de ce matériel.

Table of Contents