Oracle SPARC M8 Service Manual page 53

"Configure POST" on page 53
■
Configure POST
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
2. Set the virtual keyswitch to the value that corresponds to the POST
configuration you want to run.
This example is for the SPARC M7-8 and sets the virtual keyswitch to normal, which
configures POST to run according to other parameter values.
-> set /HOST keyswitch_state=normal
Set 'keyswitch_state' to 'Normal'
The value of keyswitch_state must be normal when individual POST parameters are
Note -
changed.
For possible values for the keyswitch_state parameter, see Oracle ILOM Administrator's
Guide for Configuration and Maintenance at http://www.oracle.com/goto/ilom/docs.
3.
If the virtual keyswitch is set to normal, and you want to define level or verbosity,
set the respective parameters.
Syntax:
set /HOST/diag property=value.
For example:
-> set /HOST/diag default_level=max
-> set /HOST/diag default_verbosity=max
4. View the current values for settings.
For example:
-> show /HOST/diag
/HOST0/diag
Targets:
Properties:
default_level = max
default_verbosity = max
67.
Detecting and Managing Faults
Configure POST
53