Servicing Power Modules; Remove A Power Module - Oracle SPARC M8 Service Manual

Servicing Power Modules

SPARC M8-8 and SPARC M7-8 servers have a single power module that includes six AC
power receptacles and the rear indicator panel. For the location of these power modules, see
"CMIOU Chassis Rear Components" on page
The SPARC M7-16 server has three power modules: one on each CMIOU chassis that each
include six AC power receptacles and a rear indicator panel, and one on the switch chassis
that includes four AC power receptacles and the rear indicator panel. For the location of these
power modules, see
Components (SPARC M7-16)" on page
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail. Follow antistatic precautions to
prevent electrostatic damage. See
These topics explain how to service the power modules.
"Remove a Power Module" on page 235
■
"Install a Power Module" on page 238
■
Related Information
"Identifying Components" on page 15
■
"Detecting and Managing Faults" on page 35
■
"Preparing for Service" on page 57
■
"Controlling the Server and Domains" on page 67
■
"Understanding Server Configurations and Failover Behavior" on page 79
■

Remove a Power Module

This procedure can be performed only by qualified service personnel.
"CMIOU Chassis Rear Components" on page 21
25.
"Prevent ESD Damage" on page
21.
and
61.
Servicing Power Modules
"Switch Chassis Rear
235