Install A Pdecb - Oracle SPARC M8 Service Manual

Install a PDECB

Install a PDECB
1. Slide the new PDECB into the empty slot.
Install the removed component.
2.
See "Install a CMIOU" on page 102
3. Verify that the fault has been cleared and the replaced component is operational.
See "Verify That a Fault Has Been Cleared" on page
4. Return the replaced component to Oracle.
See "Prepare a Component for Return to Oracle" on page
Related Information
"Remove a PDECB" on page 200
■
202 SPARC M8 and SPARC M7 Servers Service Manual • September 2017
or "Install a Switch Unit" on page
54.
64.
197.