Locate The Server; Prevent Esd Damage - Oracle SPARC T7-4 Service Manual

"Removing Power From the Server" on page 50
■

Locate the Server

You can use the Locator LEDs to identify a particular server.
1. At the Oracle ILOM prompt, type:
-> set /SYS/LOCATE value=Fast_Blink
The white Locator LEDs (one on the front panel and one on the rear panel) blink.
2. After locating the server with the blinking Locator LED, turn it off using one of
the following methods.
Press the Locator button.
■
At the Oracle ILOM prompt, type:
■
-> set /SYS/LOCATE value=Off
Related Information
"Safety Information" on page 43
■
"Tools Needed for Service" on page 45
■
"Component Fillers" on page 46
■
"Component Service Categories" on page 46
■
"Find the Server Serial Number" on page 47
■
"Prevent ESD Damage" on page 49
■
"Removing Power From the Server" on page 50
■

Prevent ESD Damage

Many components contained in the processor modules and main module can be damaged by
ESD. To protect these components from damage, perform the following steps before opening
these modules for service.
Prepare an antistatic surface to set parts on during the removal, installation, or
1.
replacement process.
Locate the Server
Preparing for Service 49