Siemens SINAMICS S120 Function Manual page 750

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Communication

10.2 Communication via PROFIBUS DP

7. In the first column, select the PROFIBUS DP address of the Publisher, in this example

8. The "I/O address" column displays the start address for every drive object.

All PROFIBUS DP slaves are listed here, for which actual value data can be retrieved. It

also provides the possibility of sharing data via slave-to-slave communication within the

same drive device.

Select the start address of the data of the drive object to be read. In the example, "268" is

If the complete data of the Publisher are not to be read, set this using the "Length"

column. Alternatively, you can shift the start address of the access, so that the required

data can be read out from the center section of the telegram component of the drive

Figure 10-32 Configuring the slave-to-slave communication nodes

Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3

Drive functions