Examples - Siemens SINAMICS S120 Function Manual

3.19.1

Examples

Examples of probe evaluation
Hex values in MT_ZSB from the above example:
● 0 = time stamp from probe 1, falling edge
● 8 = time stamp from probe 1, rising edge
● 1 = time stamp from probe 2, falling edge
● 9 = time stamp from probe 2, rising edge
Example 1
MT_STW = 100H: a search is only made for rising edges, probe 1
Figure 3-21
In the DP cycle, all time stamps for rising edges are transferred corresponding to their
sequence in time for probe 1.
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
A search is made for rising edges for probe 1
Servo control
3.19 Central probe evaluation
157