Siemens SINAMICS S120 Function Manual page 793

3. Click "Station\Save and compile" (Ctrl+S)
4. Open the shortcut menu of the S120 drive and click "Open object with STARTER" to
Figure 10-51 New project transferred from HW Config into STARTER
The STARTER window opens automatically
The project is displayed in the navigation window.
1. In the expert list of the Control Unit, set parameter p8929 = 2
Figure 10-52 p8929 from the expert list of the Control Unit
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
The previous project is saved.
configure the drives in STARTER.
10.3 Communication via PROFINET IO
Communication
791