Siemens SINAMICS S120 Function Manual page 792

Communication
10.3 Communication via PROFINET IO
Example: Two controllers in a common project
Start STEP 7:
1. Under S7, create a drive control for the new project, in the example called A-CPU, based
2. In HW Config, select the CPU 315-2 PN/DP controller and connect the PROFINET IO as
Figure 10-50 Drive control created in HW Config
790
on a SIMATIC 300.
Figure 10-49 Creating a new S7 project
the communication network. Select an S120 as drive control (in the example a CU320-2
PN).
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Drive functions