Siemens SINAMICS S120 Function Manual page 499

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Parameter p3422 (C

closed-loop control can be directly adjusted via this parameter when the master/slave

configuration changes, instead of changing the proportional gain of the V

(p3560). When parameter p3422 changes, parameter p3560 is recomputed automatically by

the firmware.

Structogram of master/slave operation, three identical Active Line Modules (ALMs) of identical output rating,

PROFIBUS communication system

Drive functions

Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3

capacitance) can be changed in operation. This means that the

p3513 = 1 ( Slave)

p3513 = 1 ( Slave)

7.9 Master/slave function for Active Infeed

Function modules