Reactors - INVT Goodrive300-19 Series Operation Manual

Goodrive300-19 series open loop vector inverter special for hosit
C.5.1 AC 3PH 380V(-15%)~440V(+10%)
Inverter model
GD300-19-1R5G-4
GD300-19-2R2G-4
GD300-19-004G-4
GD300-19-5R5G-4
GD300-19-7R5G-4
GD300-19-011G-4
GD300-19-015G-4
GD300-19-018G-4
GD300-19-022G-4
GD300-19-030G-4
GD300-19-037G-4
GD300-19-045G-4
GD300-19-055G-4
GD300-19-075G-4
GD300-19-090G-4
GD300-19-110G-4
GD300-19-132G-4
GD300-19-160G-4
GD300-19-185G-4
GD300-19-200G-4
GD300-19-220G-4
GD300-19-250G-4
GD300-19-280G-4
GD300-19-315G-4
C.6 Reactors
Transient high current in the input power circuit may cause damage to the rectifying components. It is
appropriate to use AC reactor in the input side for the avoidance of high-voltage input of the power
supply and improvement of the power factors.
If the distance between the inverter and the motor is longer than 50m, frequent overcurrent protection
may occur to the inverter because of high leakage current caused by parasitic capacitance effects
from the long cables to the ground. In order to avoid the damage of the motor insulation, it is
Fuse (A) Breaker (A)
15
17.4
30
45
60
78
105
114 100
138 100
186 125
228 160
270 200
315 200
420 250
480 315
630 400
720 400
870 630
1110 630
1110 630
1230 800
1380 800
1500 1000
1740 1200
-245-
Peripherial options and parts
Rated working current of
the contactor (A)
16
16
25
25
40
63
63
10
10
16
16
25
32
50
63
80
95
120
135
170
230
280
315
380
450
580
580
630
700
780
900