INVT Goodrive300-19 Series Operation Manual page 58

Goodrive300-19 series open loop vector inverter special for hosit
Function
Name
code
P02 Group Motor 1
Rated power
of
P02.01
asynchronous
motor 1
Rated
frequency of
P02.02
asynchronous
motor 1
Rated speed
of
P02.03
asynchronous
motor 1
Rated voltage
of
P02.04
asynchronous
motor 1
Rated current
of
P02.05
asynchronous
motor 1
Stator resistor
of
P02.06
asynchronous
motor 1
Rotor resistor
of
P02.07
asynchronous
motor 1
P02.08 Leakage
Detailed instruction of parameters
2: Output at DC braking current at stopping
0.1~3000.0kW
0.01Hz~P00.03
(the Max. frequency)
1~36000rpm
0~1200V
0.8~6000.0A
0.001~65.535Ω
0.001~65.535Ω
0.1~6553.5mH
Set the parameters of the
controlled asynchronous
motor.
To ensure control
performance, set P02.01~
P02.05 correctly according to
AM name plate.
Goodrive-19 inverters provide
parameter autotuning function.
Accurate parameter autotuning
results from correct
parameters setting.
To ensure control
performance, configure the
motor according to standard
adaptive motor. If the motor
power and standard adaptive
motor have a great gap,
control performance will
decrease obviously.
Note: Resetting P02.01 can
initialize P02.02~P02.10.
After completing parameters
autotuning, P02.06~P02.10
will update automatically. As
the basic parameters of high
performance vector control,
the parameters have a direct
impact on control
performance.
Note: Users cannot modify
-57-
Function parameters
Default
Modify
value
Depend
◎
on
model
◎
50.00Hz
Depend
◎
on
model
Depend
◎
on
model
Depend
◎
on
model
Depend
○
on
model
Depend
○
on
model
○
Depend