INVT Goodrive300-19 Series Operation Manual page 170

Goodrive300-19 series open loop vector inverter special for hosit
4
5
6
7
8
9
10
11
12
13
The below table is the option of the four function parameters and selecting the repeated output
terminal function is allowed.
Set value
0
1
2 Forward rotation operation
3 Reverse rotation operation
4 Jogging operation
5
6
7
8
9 Zero speed running
Jogging operation
Inverter fault
FDT1
FDT2
Frequency arrival
Zero speed running
Upper limit frequency
arrival
Lower limit frequency
arrival
Ready for operation
Pre-magnetizing
Function
Invalid
In operation
Inverter fault
FDT1
FDT2
Frequency arrival
23
24~32
33
34
35
36
37
The output terminal has no function.
Output ON signal when the inverter is running and
there is frequency output.
Output ON signal when the inverter is running
forward and there is frequency output.
Output ON signal when the inverter is running
reverse and there is frequency output.
Output ON signal when the inverter is jogging and
there is frequency output.
Output ON signal when the inverter is in fault
Please refer to P08.32 and P08.33 for detailed
information.
Please refer to P08.34 and P08.35 for detailed
information.
Please refer to P08.36 for detailed information.
Output ON signal when the output frequency and
-169-
Basic operation instruction
Modbus
communication
virtual terminals
output
Reserved
Contactor control
Brake control
Ready for switching
off
Ready for switching
on
Motor 2 in operation
Instruction