INVT Goodrive300-19 Series Operation Manual page 145

Goodrive300-19 series open loop vector inverter special for hosit
0
Restart after
power off
1
Waiting time of restart
after power off > P01.22
P01.21
(Restart after power off selection)
3. The starting logic figure of starting after the automatic fault reset
Relative parameters list:
Function
Name
code
Running
P00.01 command
channel
P00.11 ACC time 1
P00.12 DEC time 1
P01.00 Start mode
P01.01 Starting
N
N
Y
Restart delay time
> P01.23
In running
Inverter fault
Fault reset times of the
inverter <P08.28
Y
Interval time of
automatic fault reset of
the inverter >P08.29
Y
Fault reset and the
inverter starts to run.
Detailed instruction of parameters
0: Keypad running command channel (LED off)
1: Terminal running command channel (LED flickering)
2: Communication running command channel (LED on)
0.0~3600.0s
0.0~3600.0s
0: Start-up directly
1: Start-up after DC braking
2: Start-up after speed tracing
0.00~50.00Hz
Stand by
Keypad
0
Communication
Y
2
Terminal
1
P00.01
Running command channel
N
N
Display fault
code and the
inverter stops.
-144-
Basic operation instruction
Running
Running
Stopping
Running state before
power off
N
FWD/REV
Y
Whether the running
command terminal is valid
P01.18
(Running protection of powering on terminal selection)
Default
value
Depend
on model
Depend
on model
0.50Hz
Stopping
0
1
Running
1
0