INVT Goodrive300-19 Series Operation Manual page 69

Goodrive300-19 series open loop vector inverter special for hosit
Function
Name
code
curve
setting
Torque
P04.14 boost of
motor 2
Torque
P04.15 boost close
of motor 2
V/F
P04.16 frequency 1
of motor 2
V/F
P04.17 voltage 1 of
motor 2
V/F
P04.18 frequency 2
of motor 2
V/F
P04.19 voltage 2 of
motor 2
V/F
P04.20 frequency 3
of motor 2
V/F
P04.21 voltage 3 of
motor 2
V/F slip
compensation
P04.22
gain of motor
2
Vibration
P04.23 control
factor at low
Detailed instruction of parameters
means of Goodrive300-19 motor 2 to meet various
requirements of different loads. See P04.00~P04.12
for the detailed function code instruction.
Note: P04 group includes two sets of V/F
parameters of the motor which cannot display
simultaneously and are only valid for the selected
motor. The motor selection can be selected by
defined channels in P08.31 or terminal function 35
"the shift between motor 1 and motor 2".
In SVPWM control mode, current fluctuation may
occur to the motor at some frequency, especially the
motor with big power. The motor cannot run stably or
-68-
Function parameters
Default
Modify
value
○
0.0%
○
20.0%
○
0.00Hz
○
00.0%
○
00.00Hz
○
00.0%
○
00.00Hz
○
00.0%
○
100.0%
○
10