INVT Goodrive300-19 Series Operation Manual page 92

Goodrive300-19 series open loop vector inverter special for hosit
Function
Name
code
previous 2
fault
Output
terminals
P07.56 state at
previous 2
fault
P08 Group Enhanced function
P08.00 ACC time 2
P08.01 DEC time 2
P08.02 ACC time 3
P08.03 DEC time 3
P08.04 ACC time 4
P08.05 DEC time 4
Jogging
P08.06
frequency
Jogging
P08.07
ACC time
P08.08 Jogging
Detailed instruction of parameters
See P00.11 and P00.12 for detailed definition.
Goodrive300-19 series define four groups of
ACC/DEC time which can be selected by P5 group.
The first group of ACC/DEC time is the factory default
one.
Setting range: 0.0~3600.0s
This parameter is used to define the reference
frequency during jogging.
Setting range: 0.00Hz ~P00.03 (the Max. frequency)
The jogging ACC time means the time needed if the
inverter runs from 0Hz to the Max. frequency.
The jogging DEC time means the time needed if the
inverter goes from the Max. frequency (P0.03) to 0Hz.
-91-
Function parameters
Default
Modify
value
●
0
Depend
○
on
model
Depend
○
on
model
Depend
○
on
model
Depend
○
on
model
Depend
○
on
model
Depend
○
on
model
○
5.00Hz
Depend
○
on
model
○
Depend