Table of Contents
Advertisement
Switching off passenger
compartment monitoring and
inclination sensor on the multi-
purpose display
The passenger compartment monitoring system
and the inclination sensor (protection against
towing) can be temporarily deactivated in the
ALARM sub-menu.
When the doors are locked again, the passenger
compartment monitoring system and inclination
sensor are activated once more.
f Further important information concerning this
topic can be found in a separate chapter:
Please observe the chapter "SWITCHING OFF
PASSENGER COMPARTMENT MONITORING
SYSTEM AND INCLINATION SENSOR" on
Page 232.
Notes on operation
f Comfort settings can be made only when the
vehicle is stationary.
f For information on the operating principle of
the multi-purpose display:
Please observe the chapter "OPERATING
PRINCIPLE" on Page 112.
Switching passenger compartment
monitoring on/off
The alarm is triggered if motion is detected in the
interior with the doors locked (e.g. if a window is
broken in a theft).
1. MAIN MENU
> SETTINGS
> COMFORT
> ALARM
Select and confirm.
2. Select INTERIOR.
3. Confirm selection.
Monitoring is activated
Monitoring is deactivated
Switching inclination sensor on/off
The alarm is triggered if the vehicle is raised
markedly at one end with the doors locked
(e.g. theft attempt by towing).
1. MAIN MENU
> SETTINGS
> COMFORT
> ALARM
Select and confirm.
2. Select ANGLE.
3. Confirm selection.
Inclination sensor is activated
Inclination sensor is deactivated
Synchronous adjustment of
door mirrors
Note on operation
Comfort settings can be made only when the
vehicle is stationary.
When this function is active, the mirrors move
simultaneously and in the same direction.
1. MAIN MENU
> SETTINGS
> COMFORT
> MIRRORS
Select and confirm.
2. Select SYNCH.
3. Confirm selection.
SYNCHRONOUS ADJUSTMENT is
activated
SYNCHRONOUS ADJUSTMENT is
deactivated
Multi-Purpose Display and Instruments
129
Advertisement
Table of Contents
