85 19 Removing And Installing Passenger Compartment Monitoring Sensor - Porsche 996 TT Repair Manual

96 85 19 Removing and installing passenger
compartment monitoring sensor
Removing and installing passenger compartment monitoring sensor
Removing and installing passenger compartment monitoring sensor
top of page
Removing and installing passenger compartment monitoring
sensor
1. Using a small screwdriver, carefully unclip both cover lenses at the openings provided.
2. Undo fastening screws M 5 with a cross−head screwdriver −A− .
3. Unclip sensor holder at the rear left and right −B− , push forward towards the windshield and
remove.
4. Pull off electrical plug connection.
5. Unclip passenger compartment monitoring sensor at the side and remove from the sensor
holder.
top of page
Removing and installing passenger compartment monitoring
sensor
Note
• Do not press on or touch the transmission/reception diodes with your fingers!
• The cover lenses must not be soiled or smudged with grease!
1. Engage the electrical plug connections and carefully lay the electrical cables (do not
pinch).
2. Clip in cover lenses again.

96 85 19 Removing and installing passenger compartment monitoring sensor

1160