Table of Contents
Advertisement
System Settings
System Configuration
— Then press
— Use the
— Use the
— Press
— Press
LAN Settings
Configure the LAN settings to be used to communicate with the Data
Link Software.
Table 18-1
LAN LEDs (N9912A units with serial number prefixes ≥5607 Only)
LAN LEDs (N9912A units with serial number prefixes ≥5607 Only)
When FieldFox is connected to the LAN, the flashing LAN LEDs have the following
definitions:
Green: Flashing indicates packets are being transferred.
Yellow:
— Flash, pause = 10 Mbit link speed
— Flash, flash, pause = 100 Mbit link speed
— Flash, flash, flash, pause = 1 GBit link speed
How to configure LAN settings
The first three 'Current...' settings can NOT be edited.
— Press System 7.
— Then
18- 18
Ed
it.
arrows or rotary knob to select the field to be edited.
arrows or numeric keypad to edit that field.
Cancel
or
Done
Done
to exit the Date and Time settings. The readout in the
upper-right corner of the FieldFox screen will update accordingly.
System
Configuration.
when the edits are complete.
Keysight N9912-90001 User's Guide
Advertisement
Table of Contents
