Connecting A Reactor For Harmonic Suppression - YASKAWA Sigma-V Series User Manual

Ac servo drives

Hide thumbs Also See for Sigma-V Series:

Table of Contents

3 Wiring and Connection

3.9.3 Connecting a Reactor for Harmonic Suppression

The converters have reactor connection terminals for power supply harmonic suppression that can be used as

Connect a reactor as shown in the following figure.

Note 1. Connection terminals for DC reactor

2. Reactors are not included. (Sold separately.)

3. To use the SERVOPACK with a DC reactor, use the terminals on the converters.

short-circuit, and connect a DC reactor.

2 are short-circuited at shipment. Remove the lead wire for