Changing The Offline Topology In The Starter Commissioning Tool - Siemens SINAMICS S120 Commissioning Manual

1.5.5

Changing the offline topology in the STARTER commissioning tool

The device topology can be changed in the STARTER commissioning tool by shifting the
components in the topology tree.
Example: Changing the DRIVE-CLiQ topology
1. Select the DRIVE-CLiQ component.
2. While holding down the mouse button, drag the component to the required DRIVE-CLiQ
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
interface and release the mouse button.
You have changed the topology in the STARTER commissioning tool.
Preparation for commissioning
1.5 Rules for wiring with DRIVE-CLiQ
41