Top Lid - Christie CP2000-M Service Booklet

Section 5: Parts and Module Replacement

2.5.5 TOP LID

UV HAZARD:
within the immediate vicinity must wear safety glasses with side shields.
(3 minutes)
1. Use a #2 Phillips to loosen the 7 captive screws
securing the top lid to the projector housing (Figure
2-4
).
2. Unlock the rear lamp door using the low security
key.
3. Lift the lid up from the rear of the projector and pull
it away from the 2 tabs on the front skin.
4. When reinstalling, align the front 2 tabs and reverse
the above steps.
2-10
DANGER
When servicing the projector with the top lid removed anyone
F 2-4 R T
IGURE EMOVE OP
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
L
ID