Christie CP2000-M Service Booklet page 103

Section 7: Serial Communications
Table 4.1 Function Codes
SUBCODE
None
EXAMPLES:
(SOR?L) list orientation options
(SOR?) get the orientation status
(SOR0) set orientation to front
Select Source Format (SRF)
DESCRIPTION
Select the Source format file.
SUBCODE
Cxxx
None
EXAMPLES:
(SRF+C108 "XXX") Use file "XXX" on channel 108
(SRF+C108?) get source file name on channel 108
(SRF?L) list all entries of source control
System Status (SST)
DESCRIPTION
Retrieve the various system status groups.
SUBCODE
ALRM
CONF
COOL
HLTH
INTE
LAMP
None
PERI
SIGN
SYST
TEMP
VERS
4-22
DESCRIPTION OF USE
Select Orientation. 0 - Normal Front, 1 - Inverted Rear, 2 - Normal
Rear, 3- Inverted Front
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select source format for the current channel.
DESCRIPTION OF USE
Returns a summary of any active alarms.
Returns configuration data - model, sn, fans, air flow, etc.
Returns cooling data - cooling fans, air flow, etc.
Returns system health.
Returns interlock data.
Returns LAMP operational data.
Returns information on all status groups, with one message per
item.
Returns peripherals data - Cine-IMP.etc.
Returns signal data - freq, etc.
Returns system data - power, hours of use, shutter open, etc.
Returns temperature data.
Returns version numbers.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)