Removing Projector Covers; Shroud; Front Top Lid - Christie D4K35 Service Manual

5.4

Removing Projector Covers

5.4.1 Shroud

Remove the shroud as follows:
1. Using finger pressure, push down on the
locations specified (Red Arrows). See Figure
5-1.
2. Carefully slide the shroud sideways and
forward away from the MLM and lens.
3. Place the shroud covers on a clean service to
prevent scratches.

5.4.2 Front Top Lid

Remove the top lid to gain access to the liquid
cooling system, the IOS for integrator adjustments
and the high security lid.
(Estimated Replacement Time: 2 minutes)
1. Unlock front top lid using the low security key
provided. (Figure 5-2)
2. Lift the lid up and remove.
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Never operate the projector or the fans without all the covers installed.
Section 5: Parts and Module Replacement
Figure 5-1 Shroud Removal
Figure 5-2 Front Top Lid
5-5