Advertisement
Technical Bulletin
Cleaning projector optics
This document provides information and procedures for cleaning optical components in the Christie
cinema projectors identified in the products list.
Only these optical components can be cleaned:
•
reflector
•
integrator
•
light engine prism
•
projection lens
•
UV filter
•
IOS Lens 5
The procedures in this document must be performed by service personnel trained by Christie following
consultation with Christie support. Failure to follow this recommendation could result in damage to the
projector and void the warranty.
Typically, optical components do not need to be cleaned frequently if they are installed and operated in
a location that meets or exceeds the environmental standard recommended by Christie. Christie
recommends that all cinema projectors are installed and operated in an environment that meets or
exceeds Underwriters Laboratories (UL) standard 609.50 Pollution Degree 2 and ISO Class 9 Standard
for Office Environments.
Affected products
The following products are affected.
• Christie CP2000
• Christie CP2000-X
• Christie CP2000-XB
• Christie CP2000-SB
• Christie CP2000-ZX
Safety precautions
When cleaning optical components, observe these important safety rules to avoid personal injury or
damage to the projector.
Warning! If not avoided, the following could result in death or serious injury.
•
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
Cleaning Projector Optics Technical Bulletin
020-200298-04 Rev. 1 (08-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
• Christie CP2208
• Christie CP2210
• Christie CP2215
• Christie CP2220
• Christie CP2230
• Christie CP4220
• Christie CP4230
• Christie Solaria One
• Christie Solaria One+
1
Advertisement
Table of Contents
Related Manuals for Christie CP2000
Summary of Contents for Christie CP2000
- Page 1 UV filter • IOS Lens 5 The procedures in this document must be performed by service personnel trained by Christie following consultation with Christie support. Failure to follow this recommendation could result in damage to the projector and void the warranty.
-
Page 2: Recommended Supplies
Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when handling, servicing, or cleaning electronic assemblies. • Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause product damage and will void the warranty. Recommended supplies Use the following recommended tools to clean the optics. -
Page 3: Preparing The Projector For Service
If the entire light engine requires cleaning, contact Christie technical support. If you do not have additive-free compressed air, use an air bulb or a camel hair brush to remove dust and debris. If you have questions about the cleaning methodology, contact Christie. 1. Prepare the projector for service. -
Page 4: Cleaning The Projection Lens
If you do not have additive-free compressed air, use an air bulb or a camel hair brush to remove dust and debris. If you have questions about the cleaning methodology, contact Christie. 1. Prepare the projector for service. For more information, see Preparing the projector for service (on page 3). -
Page 5: Cleaning The Reflector
8. Reassemble the projector and connect it to AC power. Cleaning Projector Optics Technical Bulletin 020-200298-04 Rev. 1 (08-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved. ©... -
Page 6: Cleaning The Integrator
Clean the integrator with care. The integrator is fragile and is easily damaged. This procedure must be performed by trained Christie service personnel. If you do not have additive- free compressed air, use an air bulb or a camel hair brush to remove the debris. If you have questions about the cleaning methodology, contact Christie. -
Page 7: Supporting Documentation
Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com • Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com • Christie Managed Services: +1-800-550-3061 or NOC@christiedigital.com Cleaning Projector Optics Technical Bulletin 020-200298-04 Rev. 1 (08-2017) Copyright 2017 Christie Digital Systems USA Inc. All rights reserved. ©...