Christie CP2000-M Service Booklet page 48

Section 5: Parts and Module Replacement
13. Disconnect the LVPS power harness from the Motherboard. Refer to the label on the high security
cover. The LVPS power harness is noted on the label as, Power P1.
14. Disconnect the LVPS power harness form the Motherboard. Refer to the label on the high security
cover. The LVPS power harness is noted on the label as, Power CTRL P35.
15. Use a 12-14" #2 Phillips™ screwdriver to loosen the 2 thumbscrews on each side of the LVPS
(behind the cardcage).
16. Manually disconnect the 2 center channels (brown SW 1/blue SW 2) from the AC selector switch
(Figure 2-42).
F
IGURE
17. Remove the 3mm nut from the GRN terminal (Figure 2-43).
2-38
2-42 AC C C
ENTER HANNELS
F 2-43 GRN T
IGURE
A
Blue SW 2 Center Channel
B
Brown SW 1 Center Channel
ERMINAL
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)