Christie CP2000-M Service Booklet page 86

Table 4.1 Function Codes
EXAMPLES:
(CHI+C108 "/etc/data/icons/ch108.ico") use ch 108.ico for channel 108
(CHI+C108 ?) get icon file name and path for channel 108
Color Space (CSP)
DESCRIPTION
Color space control, color space file will be set when PCF in Use (PIU) is off. This control describes the source
colorimetry information. Can use index or text string to set control.
SUBCODE
Cxxx
None
EXAMPLES:
(CSP+C108 "RGB Unity") Use file "RGB Unity" on channel 108
(CSP+C108?) get color space file name on channel 108
(CSP?L) list all entries of color space control
Defaults (DEF)
DESCRIPTION
This control will reset all preference and configuration settings in the device to their default values. The value of
111 must be sent with each of the sub codes as well as the default. The number 111 helps prevent accidental use of
this control.
SUBCODE
CHAN
CONF
OPTN
PREF
UNSV
USER
EXAMPLES:
(DEF 111) - Restore all preference, configuration, option, and unsaved controls to default
(DEF+USER 111) - Clear all users and restore factory default user
(DEF+CONF 111) - Reset all configuration controls
(DEF+PREF 111) - Reset all preference controls
(DEF+UNSV 111) - Reset all unsaved controls
(DEF+CHAN 101) - Restore Channel 101
(DEF+CHAN 0) - Restore all channels
(DEF+CHAN?) - Shows last channel defaulted or -1 on failure
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select color space for the current channel.
DESCRIPTION OF USE
Restore default channels. 0 defaults all.
Set configuration controls to default.
Set all option card controls to default.
Set preference controls to default.
Set unsaved controls to default.
Clears all users and restores the factory default user. Most UI's
will require you to log in again after issuing this command.
Section 7: Serial Communications
4-5