Christie CP2000-M Service Booklet page 85

Section 7: Serial Communications
Table 4.1 Function Codes
Baud Rate (BDR)
DESCRIPTION
Set the baud rate for a serial communications port.
SUBCODE
PRTA
EXAMPLES:
(BDR+PRTA "115200") Set baud rate on port A to 115200 bits per second
(BDR+PRTA?) Get baud rate (BRD+PRTA! "115200")
Control Display Panel settings (CDP)
DESCRIPTION
Enable error messages.
SUBCODE
BACK
CONT
EXAMPLES:
(CDP+CONT 60) change the contrast level to 60%
(CDP+CONT?) requests current contrast level. Example response is (CDP+CONT!50)
(CDP+BLACK 0) disable the backlight
(CDP+BLACK 100) set the backlight to full brightness
Channel (CHA)
DESCRIPTION
Select Channel configuration to use. Channel range is 101 to 164. Channel configuration sets the input routing
and image processing options for input signals.
SUBCODE
None
EXAMPLES:
(CHA?) get current active channel
(CHA 108) set channel 108 as active channel
Channel Icon (CHI)
DESCRIPTION
Set icon file name and path for the specified channel. This selects the icon to be displayed on web UI for the chan-
nel button.
SUBCODE
Cxxx
None
4-4
DESCRIPTION OF USE
Set the baud rate on port A. Rates can be 1200,
2400,9600.19200,38400,57600 or 115200
DESCRIPTION OF USE
0 - 100. CDP Backlight Brightness level (both screen and key
backlights). 0: disable backlight.
0 - 100. CDP Contrast level.
DESCRIPTION OF USE
Select Channel. Range 101 - 164.
DESCRIPTION OF USE
Replace xxx with the channel number.Valid Range is 101 - 164.
Select icon for the current channel.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)