Christie CP2000-M Service Booklet page 89

Section 7: Serial Communications
Table 4.1 Function Codes
Lamp History (HIS)
DESCRIPTION
Retrieve lamp history entries, including the current lamp. There is an individual entry for each lamp in the history.
The format for each entry is as follows: (HIS! AAA "BBBB/BB/BB" "C" "D" EEE FFF GGG HHH III JJJ),
where:
A = Lamp Number
B = Date Lamp Installed
C = Serial Number
D = Type
E = Strikes
F = Failed Strikes
G = Failed Restrikes
H = Unexpected Lamp Off
I = Pre-installed Hours
J = Lamp Hours
SUBCODE
None
EXAMPLES:
(HIS?) get the list of installed lamps
Return: (HIS!001 "2007/05/21" "qa-1" "CDXL-30" 000 000 000 000 020 020)
Internal Test Pattern (ITP)
DESCRIPTION
List and select internal test patterns. This command also create the customized test pattern list from the internal
test patterns. The list of available test patterns is determined by what files are loaded on the TI cinema electronics.
SUBCODE
FULL
NOCR
None
SETP
USER
EXAMPLES:
(ITP ?) Get current test pattern, 0 means no test pattern is used.
(ITP 4) or (ITP " ") Use number or string to set test pattern.
(ITP+USER 4) or (ITP+USER " ") Use number of string to set test pattern from user's test pattern list.
(ITP+FULL 1) Use full screen size.
(ITP+FULL 0) Use active channel screen file.
4-8
DESCRIPTION OF USE
None
DESCRIPTION OF USE
Set(1)/Reset(0) full screen size
Internal command use only, select non - correction test patterns for
measured color.
Select test pattern from full list of defined test patterns.
Internal command for updating user test pattern list. Should not be
used by customers.
Select test pattern from user defined test pattern list.
.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)