Environment; Standard And Optional Components; Standard; Optional Components - Christie CP2000-M Service Booklet

Section 8: Specifications
5.8

ENVIRONMENT

Operating Environment
Temperature
Humidity (non-condensing)
Altitude
Maximum ambient temperature
Non-Operating Environment
Temperature
Humidity (non-condensing)
NOTE: When transporting the projector from a cold environment it is essential the projector
acclimatizes to the operating environment for a minimum of 3 hours before powering up the unit.
Failure to ensure the projector has properly acclimatized could damage projector electronics.
5.9

STANDARD AND OPTIONAL COMPONENTS

5.9.1 Standard

• Control Display Panel with interface cable
• CP2000-M/MR User's Manual (#020-100123-xx)
• Line Cord

5.9.2 Optional Components

• Prime Lenses
• 1.03:1 mDC2K Fixed Lens (#108-319104-01)
• 1.3-1.7:1 mDC2K Zoom Lens (#108-320106-01)
• 1.39-1 1.9:1 mDC2K Zoom Lens (#108-327103-01)
• 1.5 - 2.2:1 mDC2K Zoom Lens (#108-329105-01)
• 1.7 - 2.4:1 mDC2K Zoom Lens (#108-321107-01)
• 1.9 - 3.0:1 mDC2K Zoom Lens (#108-328104-01)
• 2.4 - 3.9:1 mDC2K Zoom Lens (#108-322108-01)
• 3.9 - 6.52:1 mDC2K Zoom Lens (#108-323109-01)
• Auxiliary Lenses
• 1.25 x Anamorphic Lens (#38-809054-01)
*
• 1.26x Wide Converter Lens (#108-281101-01)
*
* Use of the anamorphic or wide converter lens requires the CP2000 M-MALM.
• M-MALM (#119-101101-01)
• Replacement Bubble Lamps
• Replacement Air Filters
• DLP Cinema® Control
• DLP Cinema® Firmware Installation Program
• Rack Stand (#108-272-01 or #108-282-01)
• Extractor Kit (#119-103105-01)
• Service Documentation (#020-100124-xx)
5-8
10°C to 35°C (50°F to 95°F)
20% to 80%
0 - 3000 meters
35°C
-25°C to 65°C (-13°F to 149°F)
0% to 95%
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)