Projector Covers And Feet; Top Cover - Christie CineLife+ CP4415-RGB Service Manual

Projector covers and
feet
Learn how to remove the covers and feet of the projector.
Warning! If not avoided, the following could result in death or serious injury.
• Prior to rigging the projector, inspect the quarter-turn fasteners on the covers to ensure they are
safely secured.
• Prior to rigging the projector, always tighten the lock nut on the projector feet against the
bottom of the projector to lock the feet. Otherwise, the feet must be removed.

Top cover

The top cover provides access to the light engine, electronics, and various other internal components.
1. Loosen the four screws securing the top cover.
2. Use the high security key to open the projector service access door.
3. Disengage the top cover lock pin by pulling on the pin and lift up the top cover to remove it.
CineLife+ 4K-RGB Service Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103257-02 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
44