Air Filter Cover; Intake Air Filter - Christie CP2000-M Service Booklet

2.5.3 AIR FILTER COVER

(2 minutes)
1. Use a #2 Phillips™ to loosen the 2 captive screws
at the bottom of the filter (Figure 2-3).
2. To remove, pull the cover up and out from the
projector housing.
3. To reinstall, align the bottom tabs and reverse the
above steps. Refer to
how to replace the air filter.

2.5.4 INTAKE AIR FILTER

When installing the intake filter ensure the indicator arrow is pointing in the direction of
the airflow.
(3 minutes)
1. Remove the air filter cover. Refer to
2. Pull the air filter out of the air filter cover.
3. When installing a new filter align the top tabs and push into the filter cover. Ensure the arrow
indicator on the filter is facing in the direction of the airflow.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
2.5.4 Intake Air Filter, on
CAUTION
2.5.3 Air Filter
Section 5: Parts and Module Replacement
F 2-3 R
IGURE EMOVE
Cover.
A F C
IR ILTER OVER
2-9