Fold Mirror 2 - Christie CP2000-M Service Booklet

Section 5: Parts and Module Replacement

2.8.14 FOLD MIRROR 2

The second fold mirror is located underneath the IOS.
(1 hour/15 minutes; includes 10 minute calibration)
1. Remove top lid. Refer to
2. Remove IOS. Refer to
3. Remove 1 of the 2.5mm screws from each of the 3 tabs on fold mirror 2.
4. Loosen the remaining 2.5mm screws from each of the 3 tabs.
5. Hold the mirror in place and swing the tabs out to the side.
6. Carefully, lower the mirror to remove it.
7. Reverse the above steps to reinstall. NOTE: When installing ensure the reflective surface faces
inwards (Figure 2-71).
8. Power up the projector and align the fold mirror. For details, refer to CP2000-M/MR User Manual
(020-100123-xx).
2-58
2.5.5 Top Lid, on page
2.8.13 Illumination Optic System (IOS), on page
F 2-71 I
IGURE NSTALLING
2-10.
F M 2
OLD IRROR
2-57.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)