Using This Manual; Labels And Marking; Typographical Notations - Christie CP2000-M Service Booklet

Section 1: Introduction
1.1

USING THIS MANUAL

This manual provides technical information for assisting qualified Christie service technicians in the
servicing and repair of the CP2000-M/MR projector models. The manual is updated as required -
please check the Christie website at
Christie trained service technicians knowledgeable about all potential hazards associated with high
voltage, ultraviolet exposure and high temperatures generated by the lamp and associated circuits are
authorized to 1) assemble/install the projector and 2) perform service functions inside the projector.
NOTE: Only personnel trained specifically by Christie on lamp replacement and lamp safety may
handle the lamp.
Disclaimer: Every effort has been made to ensure the information in this document is accurate and reliable.
However, due to constant research, the information in this document is subject to change without notice. Christie
Digital Systems assumes no responsibility for omissions or inaccuracies. Updates to this document are published
regularly, as required. Please contact Christie Digital Systems for availability.

1.1.1 LABELS AND MARKING

This symbol indicates there are important operating and maintenance (servicing) instructions in
the literature accompanying the projector.
This symbol indicates non-insulated "dangerous voltage" within the projector's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock.
This symbol warns of exposure to UV light.
This symbol warns of high temperatures/hot surfaces.
This symbol warns of high pressures resulting in explosion.

1.1.2 Typographical Notations

The following notations are used throughout this manual:
• Keypad commands and PC keystrokes appear in bold small caps, such as
• References to specific areas of the document appear italicized and underlined. When viewed online
the text appears in blue indicating a direct link to that section. For example,
Module Replacement.
• References to other documents appear italicized and bold, such as Service Manual.
• References to software menus and available options appear bold, such as Main menu,
Preferences.
• User input or messages that appear on screen, in status display units or other control modules appear
in Courier font. For example. "No Signal Present", Login: christiedigital.
• Error codes, LED status appear in bold, e.g.
• Operational states of modules appear capitalized, such as power ON/OFF.
1-2
www.christiedigital.com
LP, A1 etc.
for available updates. Only qualified
,
POWER INPUT
Section 2 Parts and
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
,
etc.
ENTER