Remove The Top Lid; Remove The Front Skin - Christie CP2215 Service Manual

Parts and Module Replacement

Remove the Top Lid

1. Loosen the 7 screws that secure the top lid to the projector
2. Lift the lid up from the rear of the projector.

Remove the Front Skin

1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the lens. See
4. Remove the top lid
5. Remove the card cage intake air filter cover. See
6. Remove the 4 screws that secure the skin to the projector structure.
22
Remove the Lens
See Remove the Top Lid
.
.
on page 31.
on page 22.
Inspect the Card Cage Filter on page 19.
CP2215 Service Manual
020-101226-03 Rev. 1 (10-2015)