Christie CP2000-M Service Booklet page 99

Section 7: Serial Communications
Table 4.1 Function Codes
Projector Configuration File (PCF)
DESCRIPTION
Set Projector Configuration File (PCF) file for the specified channel. This file is used to configure many aspects
of the cinema electronics. It will only be used if PCF in use (PIU) control is set.
SUBCODE
Cxxx
None
EXAMPLES:
(PCF+C108 "SCOPE 2.39") Use PCF file "Scope 2.39" on channel 108. File used when PIU is on
(PCF?L) list all entries of PCF control
PCF In Use (PIU)
DESCRIPTION
Select whether to use the PCF file or not.
SUBCODE
Cxxx
None
EXAMPLES:
(PIU?) get the current status of PCF file
(PIU+C108 1) use PCF file on channel 108
(PIU+C108 0) do not use PCF file on channel 108
Ping (PNG)
DESCRIPTION
This command returns basic projector information to the user, which includes the type of device & main software
version. Return parameters are: Type, Major, Minor, Beta. The beta value is optional, meaning its an engineering
build and has not been validated.
NOTE: List of types for the 'type' parameter include: 40 = ACT, 41 = CP2000-ZX, 42 = CP2000-M/
MR, 43 = Reserved, 44 = CorelII
SUBCODE
None
EXAMPLES:
(PNG?)(PNG!41 001 00 0) -- Indicates 'Cinema' type, software: 1 major, 0 minor, 0 beta
Power Per Button (PPB)
DESCRIPTION
Control whether lamp power settings are configured per channel or global.
NOTE: See also other lamp commands LPI, LPP, LPM
SUBCODE
Cxxx
None
4-18
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select PCF file for the current channel.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select PCF for the current channel.
DESCRIPTION OF USE
None
.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101-164
Select Power Per Button for the current channel.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)