Christie CP2000-M Service Booklet page 102

Hide thumbs Also See for CP2000-M:
Table of Contents

Advertisement

Table 4.1 Function Codes
SUBCODE
None
EXAMPLES:
(SHU 1) close shutter
(SHU 0) open shutter
(SHU?) get current status of shutter
Select Input (SIN)
DESCRIPTION
Select Input Port. Selecting input port will reset the list and default data of DTF control. Use index number or text
description to select input port. Available options are: 00000 "292-A") 00001 "292-B") 00002 "292-Dual") 00003
"DVI-A") 0005 "DVI-Twin")
SUBCODE
Cxxx
None
EXAMPLES:
(SIN?) Get current input port
(SIN?L) Show entries on the list
(SIN 1) or (SIN "292-B") Set current input port to 292-B
(SIN+C101 ?) Get input port on channel 101
(SIN+C101 1) or (SIN+C101 "292-B") Set input on channel 101
SNMP Agent Configuration (SNM)
DESCRIPTION
This control will set the various configuration options for SNMP Agent.
SUBCODE
LEXT
LHLT
TSIP
ENVT
EXAMPLES:
(SNM+LHLT 1) - Setting this flag to 1 will disable any future lamp half life traps.
(SNM+LEXT 1) - Setting this flag to 1 will disable any future lamp expire traps.
(SNM+TSIP "xxx.xxx.xxx.xxx") Sets the Trap IP address to xxx.xxx.xxx.xxx.
(SNM+LEXT 1) - Setting this flag to 1 will disable any future lamp expire traps.
(SNM+ENVT ?) - Get the flag to see if V2 is enabled (1) or disabled (0).
(SNM+ENVT 1) - Enable SNMP V2.
(SNM+ENVT 0) - Disable SNMP V2.
Screen Orientation (SOR)
DESCRIPTION
Set screen orientation. This allows for flipping the screen orientation to allow for various mounting options of the
projector including the use of mirrors and front or rear screen projection.
CP2000-M/MR Service Booklet
020-100220-02 Rev. 1 (07/08)
DESCRIPTION OF USE
Select douser position 0 - douser removed from optical path 1 -
douser blocking optical path.
DESCRIPTION OF USE
Replace xxx with the channel number. Valid Range is 101 - 164.
Select input for current channel.
DESCRIPTION OF USE
Gets/Sets the Lamp Expire Trap Flag for the SNMP Agent.
Gets/Sets the Lamp Half Life Trap Flag for the SNMP Agent.
Sets the Trap IP address for the SNMP agent.
Enable SNMP V2.
Section 7: Serial Communications
4-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp2000-mr

Table of Contents